This is the FAXHAVEN Configuration Setup screen help file (FHCONFIG.hlp).
Copyright (c) 1996 by HTF Consulting
You can get a hard copy of this file by entering "Print FHCONFIG.hlp".

The configuration function should only be invoked when you wish to modify the
standard FAXHAVEN configuration. FAXHAVEN is capable of running stand-alone,
providing complete FAX receive and send function.  FAXHAVEN is also capable
of running on top of many of the modem software packages which come with FAX
modems. These software packages are: BITFAX, Complete PC, FRecom & Quick-Link.
When operating in this mode, FAXHAVEN adds some features and provides a
management layer, making FAX receive functions function-key driven.
FAXHAVEN is not compatible with Quick-Link ver. 3.0 and above

See the section below "Configuration Input Fields" for more details.

========================= Function Keys =======================================
<ENTER>       is *NOT* an event key. It behaves like <TAB>.
<TAB>         positions the cursor to the next field.
<shift><TAB>  positions the cursor to the previous field.

<F1>  will display this help file.

<F2>  will load the default settings for your FAX modem or modem software
      from disk, and save them as the active configuration.  If you have
      changed the default setting for the FAX modem class/software, you must
      be sure that the modem software which you employ is properly installed
      and functioning.

<F3>  will verify your input before proceeding.  This is useful when you have
      entered any change to the configuration.

<F9>  will restore the current settings from disk in case you have made an
      error.
<F10> will verify input and save to disk the current screen settings, if the
      input is error-free.
<shift><F10> will save to disk the current screen settings, even if there are
      errors.  Results may be unreliable, but it may be useful to save the
      screen before correcting errors.

<ESC> will exit this function and return to the FAXHAVEN main menu.

===================== Configuration Input Fields ==============================
REGISTRATION KEY:
Enter your 7-digit registration key if you are a registered user.

FAX MODEM CLASS//MODEM SOFTWARE
If you wish to have the software which came with your FAX modem drive the
modem, identify the software here. You may wish to use some feature of your
existing DOS-based modem software, and use FAXHAVEN for other functions.
The following choices are available: BF(Bitfax), CP(Complete PC),
FR(Frecom FAX96), and QL(Quick-Link). If you change the modem software you will
use, you must be sure that this software is installed and functioning.
After changing this field, you must enter <F2> to retrieve the default settings
for the modem software you specified.  See <F2> above.

COMM PORT
If you have not changed the modem software above, and you know the comm port
that your modem is connected to, you may enter this number here. Otherwise
FAXHAVEN will detect the correct comm port when you activate FAX receive.
You may wish to update this field after FAXHAVEN has detected the correct
comm port.

VIDEO TYPE
You may need to tell FAXHAVEN what type of video monitor you have, if
auto-detect fails or if you have a high-end monitor. The choices are:
HERC = HERCules, monochrome, screen size  720 X 348
CGA  = CGA,      16 color,   screen size  640 X 200
EGA  = EGA,      16 color,   screen size  640 X 350
VGA  = VGA,      16 color,   screen size  640 X 480
SVGA = Super VGA,16 color,   screen size  800 X 600
HIGH = HIGH res, 16 color,   screen size 1024 X 768

FAX RECEIVE DIRECTORY
If you have changed the modem software field, and  your modem software is not
installed in it's own default directory, you must update this field with the
correct directory. Otherwise it should be left alone.

RECEIVE FILE EXTENSION
This field should be left alone.

SEND OPTIONS
If you are not using FAXHAVEN provided modem software, consult your modem
software manual for any useful options here.
If you are using FAXHAVEN provided software, a set of options for driving the
FAX modem is available, as follows:
/IDxxxxxxxxxxx   Set the Station ID of the sending FAX station
/IRQx            Set Interrupt Request Line (1 - 5 )
/BDxxxxxxx       Set the port baud rate (4800, 7200, 9600, 19200 the default)
/LOxxxxxx        Set the low baud rate (4800, 7200, 9600, 19200 the default)
/XBPSxxxxxxx     Set the FAX bit per second rate (2400, 4800, 7200, 9600 the
                 default, 12000, 14400)
/MIxxxxxxxxxx    Set a modem initialization string
/HI              Use highest possible bit rate and ECM (Error Correcting Mode)
                 if available.

ACTIVATE RECEIVE:
This field should only be changed if you have changed the modem software field
above. You would only need to modify this field if your modem software is not
in it's default directory, or you wish to use invoke the receive function a
different way, such as through a batch file. If you are using the Quick-Link
product and you wish to use NITEFAX to receive and print your incoming FAXes,
you may replace the activate command with NITEFAX.

RECEIVE OPTIONS
If you are not using FAXHAVEN provided modem software, consult your modem
software manual for any useful options here.
If you are using FAXHAVEN provided modem software, a set of options for driving
the FAX modem is available, as follows:
/IRQx            Set Interrupt ReQuest Line (1 - 5 )
/BDnnnnn         Set the port baud rate (4800, 7200, 9600, 19200 the default)
/LOnnnnn         Set the low baud rate (4800, 7200, 9600, 19200 the default)
/XBPSnnnnn       Set the FAX bit per second rate (2400, 4800, 7200, 9600 the
                 default, 12000, 14400)
/MIxxxxxxxxxx    Set a modem initialization string
/Pxxxxxxxxxxx    Set received fax files path

DEACTIVATE RECEIVE
If you are using FAXHAVEN modem software, this field should be left alone.
This field should only be changed if you have changed the modem software field
above. You would only need to modify this field if your modem software is not
in it's default directory, or you wish to use invoke the receive function a
different way, such as through a batch file.

PRINT COMMAND
If you use your out-of-the-box modem software to receive FAXes, and you wish to
use their software to print received FAXes, you may enter that print command
here.  This will only be necessary if your printer is not an HP-Laserjet, Epson
or Qume printer (or a printer which emulates one of these models).  Your modem
software must be configured for your printer.
ATTENTION!! Be sure to include the text "[FILE]" after the program name to
indicate where the received FAX filename will be substituted!

PRINT DEVICE
If you are using FAXHAVEN to print FAXes, enter your Printer port here.
Valid choices are: LPT1, LPT2, LPT3, COM1, COM2, COM3, COM4.
You should not change the default of LPT1 unless you are sure.

PRINTER TYPE
If you are using FAXHAVEN to receve and print FAXes, identify your printer here.
You may need to adjust toggle switches on your printer to emulate one of the
following printers.
ECL  indicates an Epson-LQ or compatible.
EFX  indicates an Epson-FX or compatible.
ELQ  indicates an Epson-LQ or compatible.
IBM  indicates an IBM 24-pin Pro-printer
NEC  indicates an NEC 24-pin pin-writer
PCL  indicates an HP-Laserjet or compatible.
PRO  indicates a IBM 24-pin Pro-printer
QUM  indicates a QUMe printer or compatible, such as a Toshiba P321.
     Qume format has been verified only with the author's Toshiba P321.

GRAPHIC CONVERT COMMAND
If you wish to use your out-of-the-box modem software or some other utility to
convert received FAXes to some other graphic format, you may enter it here.
This will also override the default-export-format below, as you will not be
using the FAXHAVEN Convert program.
ATTENTION!! Be sure to include the text "[FILE]" after the program name to
indicate where the received FAX filename will be substituted!

GRAPHIC OUTPUT DIRECTORY
You may store your converted images in any existing directory you wish.
Indicate that directory here.

DEFAULT EXPORT FORMAT
This is the graphic format that your received FAXes will be converted to when
you request a graphic conversion.  The configured default-export-format is PCX.
This can be overridden on the configuration
screen with another graphic format.  Whatever default-export-format is config-
ured can be overidden when the conversion is requested on a file-by-file basis.
The available graphic formats are:
BFX (BITFAX proprietary format)
DCX
PCX
QFX (Quick-Link proprietary format)
TIF (TIFF Class B packbits compression)
TFB (TIFF Class B packbits compression)
TFF (TIFF Class F)
TFH (TIFF Class B Huffman Encoding)
TFU (TIFF Class B Uncompressed)

ARCHIVE OUTPUT DIRECTORY
You may store your archived FAXes in any existing directory you wish.
Indicate that directory here.
